Small part

Moderators: DAVID THOMPSON, phlat65

Small part

Postby micky0121 » Mon Jan 03, 2022 4:23 am

Hi I am looking for a Mz ts125 bolt that fit's into the crank and holds the sprocket on . 1981 bike . Any help at all please ?.
Thanks .
Mike.
micky0121
 
Posts: 3
Joined: Wed Mar 24, 2021 1:48 pm

Re: Small part

Postby Puffs » Mon Jan 03, 2022 6:06 am

Following a biased and flawed moderator choice (someone posting aggressive personal attacks is rewarded, while my technical posts are removed - behind my back & without any justification!), I have withdrawn from this forum.
Last edited by Puffs on Wed Apr 05, 2023 10:04 am, edited 1 time in total.
User avatar
Puffs
 
Posts: 2007
Joined: Tue Jan 16, 2018 11:20 am
Location: Ardennes, Belgium.

Re: Small part

Postby Gerryman Ts125 » Mon Jan 03, 2022 3:22 pm

Nope, it's a reverse threaded nut that holds the sprocket onto the gearbox output shaft. I was fed up with all my ones unwinding. So I used a wormdrive ( jubilee clamp) to hold on the sprocket. Worked fine. But If left to its own devices. It unwinds and the chain or sprocket (or both!!!!!!!) ruins the clutch pushrod and clutch mechanism.
Sorry, only bolt that fits on the right hand side of the crank, holds on the little lobe that the contacts sit on. Do you mean this?
Screenshot_20211124-224336.png
`I stink therefore I have a old bikers jacket that`s alive`
User avatar
Gerryman Ts125
 
Posts: 130
Joined: Fri May 08, 2020 9:42 am

Re: Small part

Postby Puffs » Tue Jan 04, 2022 5:08 am

Following a biased and flawed moderator choice (someone posting aggressive personal attacks is rewarded, while my technical posts are removed - behind my back & without any justification!), I have withdrawn from this forum.
Last edited by Puffs on Wed Apr 05, 2023 10:05 am, edited 2 times in total.
User avatar
Puffs
 
Posts: 2007
Joined: Tue Jan 16, 2018 11:20 am
Location: Ardennes, Belgium.

Re: Small part

Postby Gerryman Ts125 » Tue Jan 04, 2022 6:43 am

Puffs your right, I think they mean the left hand side. The sprocket that drives the hi-Vo chain to the clutch and gearbox. Hope they haven't stripped it, as they're a pain in the hole to remove. Luckily my mate used to have full workshop facility's. As he worked for Scotbike/Rightline Kawasaki in Glasgow.
`I stink therefore I have a old bikers jacket that`s alive`
User avatar
Gerryman Ts125
 
Posts: 130
Joined: Fri May 08, 2020 9:42 am

Re: Small part

Postby Puffs » Thu Jan 06, 2022 6:08 am

Following a biased and flawed moderator choice (someone posting aggressive personal attacks is rewarded, while my technical posts are removed - behind my back & without any justification!), I have withdrawn from this forum.
User avatar
Puffs
 
Posts: 2007
Joined: Tue Jan 16, 2018 11:20 am
Location: Ardennes, Belgium.


Return to Wanted

Who is online

Users browsing this forum: No registered users and 5 guests