MZ/MuZ Riders

basser
Many thanks for the link, Stephan (and I) will trawl through the info in the yahoo forum.
George

there may be others i use this

http://autos.groups.yahoo.com/group/MZOG/

dave

basser23 wrote:George,
have you tried MZOG@yahoo.com?

That's it but boy I get a msg. about twice a year.Very inactive source of info imo.

Hi

The oil filter is the same as any 1150 BMW boxer, in HiFlo it's HF163. K&N HP1002
As for the levers on an SF they are pre 2005 Yamaha xjr 1300, NOT Suzuki gsx1400 as I have seen posted.
Front pads are Triumph speedtriple 2000 or current thunderbird 1600
Front sprocket is Honda vfr 750f 90-97, rear is Yamaha R1 98-05.
Have not yet found an air filter

Mick

MJ310 wrote:Hi

The oil filter is the same as any 1150 BMW boxer, in HiFlo it's HF163. K&N HP1002
As for the levers on an SF they are pre 2005 Yamaha xjr 1300, NOT Suzuki gsx1400 as I have seen posted.
Front pads are Triumph speedtriple 2000 or current thunderbird 1600
Front sprocket is Honda vfr 750f 90-97, rear is Yamaha R1 98-05.
Have not yet found an air filter

Mick

Now that's what I'm talkin' bout.
Thanks Mick.
The P/N you listed for the K&N oil filter is actually for an air filter.

Front sprocket from VFR750F also fits:
93-97 CBR900RR
94-03 VF750/C/CD/C2
98-05 VTR 1000F
00-06 RC-51/RVT1000R
03-07 CB 900F

The K&N HP-1002 is definatly an oil filter, just google it.

MJ310 wrote:The K&N HP-1002 is definatly an oil filter, just google it.

I sell K&Ns, looking in the catalog I see oil filters listed as starting with KN-
and air filters starting with AL- (Aprilia) BM-(BMW) etc.
No HPs in there for air or oil filters.

mach
Just bought a K &N Oil filter for the MZ, HP 1002 (the third one that I have used) perhaps the codes are different outside the US.

boilermaker wrote:mach
Just bought a K &N Oil filter for the MZ, HP 1002 (the third one that I have used) perhaps the codes are different outside the US.

I think the HP stands for High Performance.
Googled and found it.

Any filter for a late 80's Chrysler Lebaron or Dodge Daytona w/2.2L engine works. Cheap ones all the way up to the HP1002 K&N. I've been using the K&N's from the get-go, over 45,000 miles to date.

Mach IV wrote:Front sprocket from VFR750F also fits:
93-97 CBR900RR
94-03 VF750/C/CD/C2
98-05 VTR 1000F
00-06 RC-51/RVT1000R
03-07 CB 900F

You can pick up nice aluminum Vortex rear sprockets at Cycle Gear for any 1st generation FZ1 like a 2002 for about $60 or so, as well as a Vortex front for a Honda 919/929 among other listed.

Do a search for the K&N air filter I made up using an original MZ filter frame and a K&N filter that I modified. Pretty simple to do, and still holding up after many miles and years. Your choice is oem or oem otherwise!

LWS66 wrote:

Mach IV wrote:Front sprocket from VFR750F also fits:
93-97 CBR900RR
94-03 VF750/C/CD/C2
98-05 VTR 1000F
00-06 RC-51/RVT1000R
03-07 CB 900F

You can pick up nice aluminum Vortex rear sprockets at Cycle Gear for any 1st generation FZ1 like a 2002 for about $60 or so, as well as a Vortex front for a Honda 919/929 among other listed.

Yep,I'm a Vortex dealer also, that's where I got the info.
Nice to see this thread rolling along with new info.

NGK part number for stick coils: 48031
Just dropped one and had to replace it.