My TS250/1 has been leaking a lot of oil from the gearbox and I've decided to deal with it but I'm going mental trying to get the primary drive cover off.
I have the long screws out, the rev counter drive nut off, the clutch cable and leader out and the gear lever off but the cover only moves out about 4mm.
What have I missed?
Edit: I've done this before to do the kickstart but I can't remember the detail - just that there was a gotcha that time too.
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
TS250/1 Primary drive cover removal
Moderators: DAVID THOMPSON, phlat65
2 posts
• Page 1 of 1
TS250/1 Primary drive cover removal
by smellybeard » Sat Jul 03, 2021 12:58 pm
TS250/1 | Ducati 250 Mk.3 | 1960 NSU Supermax | 1946 Velocette MAC | Honda C90 | Guzzi SP1000
- smellybeard
- Posts: 9
- Joined: Mon Jul 30, 2018 3:22 pm
Re: TS250/1 Primary drive cover removal
by smellybeard » Sat Jul 03, 2021 1:35 pm
Sorted - gently tap the clutch retraction screw around.
As I suspected, the gearchange shaft o-ring was badly torn.
As I suspected, the gearchange shaft o-ring was badly torn.
TS250/1 | Ducati 250 Mk.3 | 1960 NSU Supermax | 1946 Velocette MAC | Honda C90 | Guzzi SP1000
- smellybeard
- Posts: 9
- Joined: Mon Jul 30, 2018 3:22 pm
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 168 guests