engine to bing rubber and bing to air box rubber

Vehicles equipped with the 500 cc Rotax engine

Moderators: DAVID THOMPSON, phlat65

engine to bing rubber and bing to air box rubber

Postby ddtee » Fri Aug 19, 2011 12:53 pm

My 94 Country 500 is running way too lean for being on the #3 needle notch from top, and although they do not seem to be all the way through the rubbers are deeply and severely cracked, and I want to replace them. I've been trying to get through to Fred Rogers but with no success. Does any one out there have these rubbers new in the states? Any help would be appreciated.

Darell
Success is relative: It is what we can make of the mess we have made of things.
- T. S. Eliot
User avatar
ddtee
 
Posts: 4
Joined: Sun Jun 19, 2011 2:00 pm
Location: Pacific North West

Re: engine to bing rubber and bing to air box rubber

Postby MZCountryRider » Sun Aug 21, 2011 3:35 pm

The carb to engine one is a Rotax part i believe, so you might check with Ron Wood: http://www.rotax.net/
Charlie
'69 Guzzi Ambassador
'71 Guzzi Ambassador
'72 Benelli 175 Enduro
'73 Guzzi Eldorado
'76 Guzzi I-Convert
'77 Morini 3 1/2 Strada
'81 Ducati 500SL Pantah
'82 Moto Guzzi V50 III
'97 MuZ Skorpion Tour


http://www.AntietamClassicCycle.com/
MZCountryRider
 
Posts: 120
Joined: Tue Jul 22, 2008 9:16 am
Location: western Maryland, USA

Re: engine to bing rubber and bing to air box rubber

Postby comanche91 » Mon Aug 22, 2011 8:08 pm

I have a spare I can lend you until you can find a replacement. It's for the Bing carb. And no, you can't get them from Ron Wood unfortunately. At least that's what Elliott told me.
-Don
Image
1-3/4 1995 Silver Stars
User avatar
comanche91
 
Posts: 432
Joined: Sun Aug 16, 2009 4:50 pm
Location: Sweet Home Alabama


Return to 500 cc

Who is online

Users browsing this forum: No registered users and 35 guests