Page 2 of 6

Re: 660 Check it before it goes BANG!!!

PostPosted: Mon Jan 21, 2013 12:29 pm
by den
cat wrote:freaking google it man! No wonder Bill got so frustrated. :x

http://lmgtfy.com/?q=yamaha+%221S3-11536-00%22

and if you don't like all the american /raptor links in the results, then read the thread that David posted the link to and order the XT660R/X part.

AWWWW. So sorry bill , Didnt realise you were so sensative and people chatting away in the forums frustrates you so much..I see CATS only input is to put me down even though i appologised in my thread and said i had already searched the tinternet with no luck ( of skill as it seems), I thought the essence of this forum is to help people out and make things easyer,why sould i spend more than 30 minutes looking for an answer to a question when i know OTHERS here would be only too glad to point me in the right direction,

Re: 660 Check it before it goes BANG!!!

PostPosted: Mon Jan 21, 2013 2:33 pm
by Windmill
Don't want to make any enemies here, but it's in the nature of these forums that sometimes users will ask repetitive questions and may not find answers already on site :? If you want a well used site this kind of response won't help. We ALL make mistakes and overlook things from time to time.........especially me :wink:

Re: 660 Check it before it goes BANG!!!

PostPosted: Mon Jan 21, 2013 10:01 pm
by buckwheat5679
I got a question and yes I did some searching before hand. Does the water pump seal get distrurbed during disassembley and if being replaced does the raptor seal work or not?
I just want to order all the parts at one time.

Re: 660 Check it before it goes BANG!!!

PostPosted: Tue Jan 22, 2013 1:16 am
by Chalks
:cry: Sometimes a gentle nudge in the right direction is all it takes, as I had when I started this thread. When I find something wrong and I can't fix it, I immediately think "how much is this going to cost me?" Then a quick search then asks questions. The MZ gurus knowledge is priceless and when they spill the beans it's like a reassuring cuddle off your old Dad letting you know everything's going to be all right :smt007 .

P.S.
The pump seal is an O ring, the one I stripped came our good so can be reused, the Raptor waterpump looks like a different setup to the MZ.

Re: 660 Check it before it goes BANG!!!

PostPosted: Tue Jan 22, 2013 10:08 am
by cat
i was not talking about repetitive questions.
@Den:
1. you did not search for the part number. now you know - you can search for part numbers.
2. you were given a link to a thread where all the info was. you did not bother to read it, instead you asked questions which are answered in that thread....which led to someone copying a pic from there to here. It's called "you want to be spoon-fed."
3. it is internet. wtf is 'tinternet'.

Re: 660 Check it before it goes BANG!!!

PostPosted: Tue Jan 22, 2013 11:28 am
by Windmill
Cat, You were talking about "may not find answers already on site". I wondered since joining why there isn't much chat on this forum, there is a little between longstanding members but nowt much if anyone is new from my observations. Others seem to wonder why it's quiet, as in the Where is everyone thread............now I think I understand why. There's nothing clever in abusing someone who genuinely didn't see the info for whatever reason, for the record the link you refer to does not show up well on my screen anyway. I have no intention of descending to any similar level of abuse though so will leave you to get on with it, shame as there is a very real need for a good site for these machines.

Re: 660 Check it before it goes BANG!!!

PostPosted: Tue Jan 22, 2013 1:39 pm
by Baggy_Al
Give the guy(windmill) a break,he has a point, several in fact. He has been on the site a fortnight, each sites search is different, this one is different to the BM site I also use so perhaps "a hope this helps"and a link would be better than having a "go" we were all new on here once, for me not so long ago and luckily I have not had to ask a technical question, yet, I would like to think those in the know would help rather than belittle.

Re: 660 Check it before it goes BANG!!!

PostPosted: Tue Jan 22, 2013 3:26 pm
by Rhino-1
...and lets not forget the "exchanging words" value that is inherent to an interactive message board. It is good to search and all, but it is better to ask, get an answer, exchange ideas, and just generally enjoy the camaraderie that comes with individuals that have something in common.

I'm going to ask questions as I see fit--sometimes they may appear repetitive, but if I get flamed, that's okay--no internet key board ninja is going to dampen my day... Ultimately, I hope to learn and contribute by giving back by being here to answer the next wave of repetitive questions... :mrgreen: 8)

Re: 660 Check it before it goes BANG!!!

PostPosted: Tue Jan 22, 2013 4:18 pm
by Skorpion660
cat wrote: wtf is 'tinternet'.


Parody of Northern English accent. Shortening of The Internet to "T'Internet :-D

wtf :?:

Re: 660 Check it before it goes BANG!!!

PostPosted: Tue Jan 22, 2013 6:19 pm
by DAVID THOMPSON
if you cant get the search to work on some thing
ask me in a pm
i may have planted a search word in the post the info is in ..
and i have a 500gb hard drive full of pdf files on the 4 stroke mz bikes
and maybe a link to stuff on some of the 2 smoker info
dave

answering questions on here keeps me out of the cold basement
when it warms up the Saxon Tour is in trouble its on the work stand
ready to work over from its DEC 2007 wreck...
dave

Re: 660 Check it before it goes BANG!!!

PostPosted: Tue Jan 22, 2013 6:37 pm
by DAVID THOMPSON
show this to a Yamaha dealer
2007 Yamaha RAPTOR 700 OEM Gear, Drive 1S3-11536-00-00
this is for usa owners
if he does not have it ..his computer can find a dealer that does
if he does not want to tell you who FIND an owner friendly dealer

mine gave me the guy's phone number that had one in stock
that the reason he gets business he keeps no secrets...
when he first saw my bike he told me to check this gear area for the
problem asap
dave

Re: 660 Check it before it goes BANG!!!

PostPosted: Tue Jan 22, 2013 6:57 pm
by OLDMTNCARVER
David,

I've not seen on the forum that you'd changed your's out yet...
How's it going?

Robert

Re: 660 Check it before it goes BANG!!!

PostPosted: Tue Jan 22, 2013 7:33 pm
by DAVID THOMPSON
only have one work stand and the saxon tour is on it ...
have a lot of thing to do to the 660 so its on the back burner till summer
i retire July 1 2013
and a trip to Colorado is planed late June after school is out
then work on the bike collection
bmw R51/3 bmw R50s bmw /2 with /5 750 motor /sidecar bike
and the 3 mz bikes

and a big pile of dead ham radio gear

to which i just added a SBE model 34 4 band amateur 60 watt pep radio
made 1966 to about 1970
its in fair shape but needs some TLC next winter when the shop is cold
i will stay by the heater and restore it
some detail in this link
http://www.eham.net/reviews/detail/5020

i plan on doing a detailed picture book of the 660 gear change
dave

Re: 660 Check it before it goes BANG!!!

PostPosted: Tue Jan 22, 2013 8:19 pm
by OLDMTNCARVER
Retired, no one ever really retires...

Colorado in June...
(Practicing) fly fishing is work, moving your arm so much...
Hiking, all those tall mountain trails...
Of course there's Red Rock for a concert, that might work!

Hey, future (around July) congrats!
Regards,
Robert

Re: 660 Check it before it goes BANG!!!

PostPosted: Wed Jan 23, 2013 7:38 am
by breakwellmz
Skorpion660 wrote:
cat wrote: wtf is 'tinternet'.


Parody of Northern English accent. Shortening of The Internet to "T'Internet :-D

wtf :?:


What The F+++ :lol: