anyone replaced the two chain rollers towards the front of the sing arm the rubbers on mine are pretty worn, and would like to put some new ones on there are there any equivalents as fitted to other bikes or anyone know the diameter.?
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
chain roller size equivalent
Moderators: DAVID THOMPSON, phlat65
5 posts
• Page 1 of 1
chain roller size equivalent
by handsomejackuk » Tue May 26, 2020 5:06 pm
Hi,
anyone replaced the two chain rollers towards the front of the sing arm the rubbers on mine are pretty worn, and would like to put some new ones on there are there any equivalents as fitted to other bikes or anyone know the diameter.?
anyone replaced the two chain rollers towards the front of the sing arm the rubbers on mine are pretty worn, and would like to put some new ones on there are there any equivalents as fitted to other bikes or anyone know the diameter.?
I'm a schizophrenic so am I !!!!
- handsomejackuk
- Posts: 939
- Joined: Thu May 04, 2006 10:13 am
Re: chain roller size equivalent
by DAVID THOMPSON » Tue May 26, 2020 9:57 pm
the most abused device in history skate board wheels ..
they make good frame sliders also
just put a very good bearing in them
they make good frame sliders also
just put a very good bearing in them
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5153
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
Re: chain roller size equivalent
by Puffs » Wed May 27, 2020 4:21 am
Many enduro/MX bikes have rollers like that.
Normally 2 sealed bearings in there. And they both die quickly, it is not a comfy life they have.
Normally 2 sealed bearings in there. And they both die quickly, it is not a comfy life they have.
-
Puffs - Posts: 2007
- Joined: Tue Jan 16, 2018 11:20 am
- Location: Ardennes, Belgium.
Re: chain roller size equivalent
by handsomejackuk » Wed May 27, 2020 4:19 pm
DAVID THOMPSON wrote:the most abused device in history skate board wheels ..
they make good frame sliders also
just put a very good bearing in them
done the skate board wheels for my axle sliders,
for reference they are 32mm diameter, 28mm width. i took mine off today, and mounted them in my lathe and turned them smooth job done saved myself a few quid they be ok for the moment.
I'm a schizophrenic so am I !!!!
- handsomejackuk
- Posts: 939
- Joined: Thu May 04, 2006 10:13 am
Re: chain roller size equivalent
by DAVID THOMPSON » Thu May 28, 2020 12:42 am
mounted them in my lathe
if i ever move i will build a box trailer and put the lathe in it and take it with me
you can use it to wind up a transformer to make a buzz box welder
and things are good
dave
if i ever move i will build a box trailer and put the lathe in it and take it with me
you can use it to wind up a transformer to make a buzz box welder
and things are good
dave
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5153
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 168 guests