Skorpion substitute part database- please add!

Black Panther/Street Moto, Baghira, Enduro, Mastiff, Skorpion Traveller and Tour.

Moderators: DAVID THOMPSON, phlat65

Re: Skorpion substitute part database- please add!

Postby Srinath » Thu Nov 20, 2014 1:10 pm

zippy49 wrote:Anyone know of a substitute part for the Traveller's rear view mirrors? Or at least something that would fit?

I'm not sure about the thread, but try napoleans or emgo's tha tare meant to fit a GS500.
When in doubt use GS500.
Cool.
Srinath.
Srinath
 
Posts: 332
Joined: Wed Apr 06, 2011 10:33 am
Location: Charlotte NC

Re: Skorpion substitute part database- please add!

Postby DAVID THOMPSON » Thu Nov 20, 2014 2:14 pm

Member hb7 sells mirrors
look for www moto-sience .com
i think thats it
dave
got a nice set for the rt125 that fold up so i can get in the shop..
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
User avatar
DAVID THOMPSON
Moderator
 
Posts: 5150
Joined: Sun Nov 23, 2003 11:01 am
Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV

Re: Skorpion substitute part database- please add!

Postby zippy49 » Fri Nov 21, 2014 12:37 pm

I guess I need to point out that the Traveller has a full fairing... Handlebar mount mirrors do not match what's on there at all.
Tom in SoCal
zippy49
 
Posts: 60
Joined: Wed Jan 18, 2012 12:17 pm
Location: Southern California

Re: Skorpion substitute part database- please add!

Postby billr » Fri Nov 21, 2014 6:24 pm

zippy49 wrote:I guess I need to point out that the Traveller has a full fairing... Handlebar mount mirrors do not match what's on there at all.

I have a Traveller with a set of mirror/signals from hb7.
Front view of the set up
These are a bit longer and I see more road and less elbows... :lol:
Look for something with a 40 mm bolt spacing.

Bill R
billr
 
Posts: 319
Joined: Fri Jul 03, 2009 9:27 pm
Location: Nashville, TN

Re: Skorpion substitute part database- please add!

Postby tigcraft » Sun Apr 05, 2015 2:36 am

BUMP
ETZ250, ts150, ts250, Other toys.....Trx850...Bonneville SE...Bmw f800gt bmw Rockster ...X7...GSX250KATANA ...TL1000
tigcraft
 
Posts: 324
Joined: Mon May 17, 2010 4:22 pm
Location: Holmfirth in West Yorkshire

Re: Skorpion substitute part database- please add!

Postby Dicer » Tue Apr 07, 2015 9:28 pm

Hydraulic rear brake light switch for Skorpion Tour (maybe others) is Aprillia #81244679. Thread is 10x1 mm. I bought mine from A1 Racing. There are cheaper ones that will fit but the electrical connections would need changing. This one is a straight swap.
Clive in Central Florida
'96 Skorpion Tour.
Dicer
 
Posts: 25
Joined: Sun Feb 22, 2015 3:33 pm

Re: Skorpion substitute part database- please add!

Postby Kcfirebolt » Mon Apr 13, 2015 1:27 pm

Anyone know of a replacement for the chain slider (rubber pad that runs along the top front of the swing arm)?

Thanks,

Charles
Kcfirebolt
 
Posts: 36
Joined: Wed Mar 28, 2012 3:42 pm

Re: Skorpion substitute part database- please add!

Postby DAVID THOMPSON » Mon Apr 13, 2015 3:45 pm

replace with a flat piece of serpentine belt from a car i find junk pieces all the time at my auto mechanic shop

dave
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
User avatar
DAVID THOMPSON
Moderator
 
Posts: 5150
Joined: Sun Nov 23, 2003 11:01 am
Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV

Re: Skorpion substitute part database- please add!

Postby Kcfirebolt » Mon Apr 13, 2015 3:55 pm

Would you glue it to the frame with JB Weld or something similar? One suggestion I received was to find an old Delrin cutting board, cut a strip and JB Weld it to the swingarm. I thought I might be able to safety wire it (drill holes along the bottom) as a backup fastener (in case the glue gave way).
Kcfirebolt
 
Posts: 36
Joined: Wed Mar 28, 2012 3:42 pm

Re: Skorpion substitute part database- please add!

Postby DAVID THOMPSON » Mon Apr 13, 2015 6:25 pm

you will need to get creative

i have a bunch of bikes that are OLD and my DAD left me a very old machine shop... so doing it my way may not be best :D
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
User avatar
DAVID THOMPSON
Moderator
 
Posts: 5150
Joined: Sun Nov 23, 2003 11:01 am
Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV

Re: Skorpion substitute part database- please add!

Postby MZCountryRider » Tue Apr 14, 2015 8:57 am

Kcfirebolt wrote:Anyone know of a replacement for the chain slider (rubber pad that runs along the top front of the swing arm)?


I made one out of Tivar (UHMV polyethylene) for my Cagiva Elefant. Used cardboard to make a pattern first, transferred that the the sheet of Tivar, cut it out on the bandsaw and drilled the mounting holes. Easy to bend around the swingarm. Fit perfectly and works fantastic. After 350 miles, there's not a mark on the Tivar, even though the chain drags across it regularly.
Charlie
'69 Guzzi Ambassador
'71 Guzzi Ambassador
'72 Benelli 175 Enduro
'73 Guzzi Eldorado
'76 Guzzi I-Convert
'77 Morini 3 1/2 Strada
'81 Ducati 500SL Pantah
'82 Moto Guzzi V50 III
'97 MuZ Skorpion Tour


http://www.AntietamClassicCycle.com/
MZCountryRider
 
Posts: 120
Joined: Tue Jul 22, 2008 9:16 am
Location: western Maryland, USA

Re: Skorpion substitute part database- please add!

Postby Kcfirebolt » Tue Apr 14, 2015 9:11 am

Would it be possible to take a picture and post/email it to me?

charleswmillerjr at

gmail dot com
Kcfirebolt
 
Posts: 36
Joined: Wed Mar 28, 2012 3:42 pm

Re: Skorpion substitute part database- please add!

Postby Kcfirebolt » Tue Apr 14, 2015 1:37 pm

I've ordered a foot long piece of Tivar from Ebay. Should be here in a few days. Thanks. Still would love to see a pic of your set up.
Kcfirebolt
 
Posts: 36
Joined: Wed Mar 28, 2012 3:42 pm

Re: Skorpion substitute part database- please add!

Postby MZCountryRider » Thu Apr 16, 2015 8:52 am

A couple of photos when I was making the guide for the Elefant.

Made a cardboard pattern:

Image

Image

Covered the Tivar sheet with masking tape and transferred the pattern to it:

Image

Cut out on the bandsaw, mounting holes drilled and installed:

Image
Charlie
'69 Guzzi Ambassador
'71 Guzzi Ambassador
'72 Benelli 175 Enduro
'73 Guzzi Eldorado
'76 Guzzi I-Convert
'77 Morini 3 1/2 Strada
'81 Ducati 500SL Pantah
'82 Moto Guzzi V50 III
'97 MuZ Skorpion Tour


http://www.AntietamClassicCycle.com/
MZCountryRider
 
Posts: 120
Joined: Tue Jul 22, 2008 9:16 am
Location: western Maryland, USA

Re: Skorpion substitute part database- please add!

Postby Kcfirebolt » Thu Apr 16, 2015 11:28 am

Thank you for the images!
Kcfirebolt
 
Posts: 36
Joined: Wed Mar 28, 2012 3:42 pm

PreviousNext

Return to 660 cc

Who is online

Users browsing this forum: No registered users and 25 guests