Another performance page

SM, SX, RT, FunX, and models re-branded as ATK in U.S.

Moderators: DAVID THOMPSON, phlat65

Another performance page

Postby jbthumper » Wed Jan 26, 2005 1:47 pm

CHeck this page out....

http://www.powroll.com/P_MZ125.htm

i think they r good.....has anyone given it a try??
User avatar
jbthumper
 
Posts: 319
Joined: Tue Mar 23, 2004 3:59 am
Location: Malaysia

performance page

Postby ptong » Sat Feb 12, 2005 2:47 pm

I purchased the supertrapp IDS2 for my RT and found it a good muffler performance wise, but it was super loud for legal street use (just too high a frequency, no deep thump) as well it wasn't very well made. The construction was solid but being aluminum it looked terrible really quickly, as well the internal threaded bolt holes that the pins used to keep the disks on thread into, were pressed into the body and one actuallypopped out! This made for a bit of an issue and this was due to the bolt holes not being straight to start with.
I now run a takegawa silencer with a small baffle piece to cut back on the shockwave (its a small pipe) and it runs great, with a little loss of low end I compensated for with a 15 front Sprocket.
Remus also made a muffler for it which although not displayed on their website is available if you email them and request it.
ptong
ptong
 
Posts: 39
Joined: Sat Feb 12, 2005 10:18 am


Return to 125 cc

Who is online

Users browsing this forum: No registered users and 51 guests