Front Brake disc Warped!!!

SM, SX, RT, FunX, and models re-branded as ATK in U.S.

Moderators: DAVID THOMPSON, phlat65

Front Brake disc Warped!!!

Postby ptong » Thu Apr 07, 2005 10:07 am

Hi folks,
I have just found out that my front disc has warped... any ideas on what may have done it? I haven't had any accidents whatsoever... and now it sort of pulses as I use the brake. Guess I will have to buy another... I bought the bike in August of 2004... brand new... is this normal?
ptong
ptong
 
Posts: 39
Joined: Sat Feb 12, 2005 10:18 am

Postby micheleen » Thu Apr 07, 2005 11:57 am

Sound very unusual, my bike sits out in the rain all winter and apart from a bit of rust I've have no brake problems. Only other thing I can think of to warp a disc would be overheating but I'm sure you'd notice a glowing brake disc :shock:

Cheers, Mike
User avatar
micheleen
 
Posts: 61
Joined: Sun Oct 24, 2004 10:59 am
Location: Cumbria, UK

Postby jbthumper » Thu Apr 07, 2005 12:05 pm

normal is not what it is.. :shock:
wheel bearings ok??because this could cause the pulse sensation...
have you checked your calipers??mountings tight??pistons working good??
is the rotor bolted on tightly??


OR
if it's really warped....you can send it for "pressing"but it won't be good as new,though...but usable.....

OR
get those wave discs for KTM exc's they look damn good!! :twisted:


Just my 2 cents...
hope it helps!!
User avatar
jbthumper
 
Posts: 319
Joined: Tue Mar 23, 2004 3:59 am
Location: Malaysia

Postby DAVID THOMPSON » Thu Apr 07, 2005 4:48 pm

mine was wharped also replaced it in dec 04 ok now

9016019000 front 280 mm

about $160 usd

ouch!!
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
User avatar
DAVID THOMPSON
Moderator
 
Posts: 5153
Joined: Sun Nov 23, 2003 11:01 am
Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV

Postby jayded1 » Thu Apr 07, 2005 5:30 pm

I would check the bearings or check the fastners on both rotor and caliper.

Would anyone know where to get rear break pistons? I let my pads wear down to nothing and one of mine has expanded to the point of being unuseable.
125 sx
In Bermuda
jayded1
 
Posts: 33
Joined: Wed Feb 23, 2005 1:00 am

Postby ptong » Fri Apr 08, 2005 11:03 am

thanks for the feedback.

I will check everything else, but just eyeballing it when the wheel spins shows a slight warp. I will try to get it covered under warranty. Although I have already had one warranty issue so despite my love for me bike its a bit of a p*** off.
ptong
ptong
 
Posts: 39
Joined: Sat Feb 12, 2005 10:18 am


Return to 125 cc

Who is online

Users browsing this forum: No registered users and 46 guests

cron