TS250/1 - 5 speed

ETZ(including Kanuni), ETS, ES, TS, IFA-RT, BK, Saxon,

Moderators: DAVID THOMPSON, phlat65

Re: TS250/1 - 5 speed

Postby Jay Bee » Thu Jan 25, 2024 5:00 am

mick wrote: Strange if this is from the factory.

It isn't - see also dave47's comment above.
If MZ had used such a resistor they certainly would not have mounted it inside the air box.
What is the resistor connected to, electrically ?
Last edited by Jay Bee on Fri Jan 26, 2024 8:24 am, edited 1 time in total.
Jay Bee
 
Posts: 51
Joined: Wed Aug 13, 2014 7:38 pm

Re: TS250/1 - 5 speed

Postby mick » Thu Jan 25, 2024 10:41 am

It was not connected to anything, it sat inside the housing without any wires poking through outside of the housing, I found it after talking the housing apart.
I cannot find any description in wiring diagram.
mick
 
Posts: 62
Joined: Mon Mar 22, 2021 2:00 pm

Re: TS250/1 - 5 speed

Postby DAVID THOMPSON » Thu Jan 25, 2024 8:08 pm

IT CONTROLS CURRENT FLOW USUALLY MAY BE THERE LEFT BEHIND BY A PAST OWNER
LEAVE IT OUT IF NOT FOUND ON ANY DRAWINGS
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
User avatar
DAVID THOMPSON
Moderator
 
Posts: 5153
Joined: Sun Nov 23, 2003 11:01 am
Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV

Re: TS250/1 - 5 speed

Postby mick » Fri Jan 26, 2024 9:16 am

Thanks for the info on this strange component, I have installed it back in the cover and blocked the two holes up with loctited bolts and used a anaerobic Loctite between the housing halves to seal up the filter housing to give it the best shot at clean air to the engine.
mick
 
Posts: 62
Joined: Mon Mar 22, 2021 2:00 pm

Previous

Return to Vintage Motorcycles

Who is online

Users browsing this forum: Bing [Bot] and 114 guests