Scorpian Sport - First impressions....

[Dave-the-rave]

Found these pics of a Traveller but it looks like a Tour.Seems they have the same yolk as the Sport. Clip ons look like they fit on the fork uppers in the same way but they are higher, similar to a NTV650...

[edfmaniac]

Here's another good shot of the stock Traveller set up. I found it to be more than touring friendly.

[DAVID THOMPSON]

thanks mine are similar but still to wide
and i used the bars from a saxon tour but not too happy with how strong the whole thing is

pic of what i did when i find the camera

i do not want to drill my stock triple clamp for risers unless have too

but not happy with iT as i have said many times i am not a fan of mods

but it kills my back the way it is....on a long trip i can get there quicker on the rt125
as the traveller just beats the crap out of me

dave

[Srinath]

I have found the MZ replica and tour front suspension to be pretty stiff ... it beats up my wrists.
By contrast the Katana FE I have on my GS almost is too soft to even be on a bike that a 100 lb lighter than the intended kat 6.
Maybe putting that FE on a MZ is the answer ... the legs are the same dia ... so they should slide in.
Spacing I think is 1/4" wider on the MZ. Or is that closer to 1/8" Either way ... its close enough a few hours of machining can get you fitted up.
Cool.
Srinath.

[Srinath]

MZ is 6", 89-96 katana is 5 and 3/4". The 97 and later katana is 6" I think. I dont have that sitting around now to measure it.
Cool.
Srinath.

[zippy49]

My '98 Traveller came with those Italian adjustable handlebars, and they seem to be plenty high enough for me. It also came with a full fairing and the Hepco & Becker bags.

Protip: You can remove the bolts that thread into the fuel tank quite easily if you hold the washer underneath from turning with a pair of pliers....that also keeps the insert from turning.

[poppanitrous]

Aftermarket for MZ clutch perch/lever

[poppanitrous]

Besides ordering factory MZ replacements,ive tried a few different levers and had a cable made but it doesnt feel smooth,almost has a gritty feel through the stroke of the clutch pull.

I just read the NINJA EX500 cable will work,but im wondering what part# and what clutch perch and lever can i use from a YAMAHA ir KAWASAKI since that is the only dealer in my area here in the USA (FLORIDA).
I would like an admustable like my motocross bikes but i would be happ with anything smoother than what i have now.
Any ideas and PARTS#s for yamaha/KAWI, CLUTCH CABLE and clutch perch/lever combination thats works on MZ sport clip-ons?

Please P.M. Me with part#s you have used with success.

Thank you